What hardware is needed for Low Profile Ground Mounts?
I'm trying to determine what hardware I will need to mount (12) x 215w Evergreen Panels as low to the ground as possible at a 23 degree incline on 240" unirac rails.
Basically, you will need schedule 40 pipes, cross pipes (for each pipe), rail mounting brackets (2x # of rails), sliders (one for each pipe), front and rear end caps (for each pipe).
You may also consider Unirac Pole Mount, using a shorter pipe.
I believe part number 500342 would suffice for 4 x Evergreens. So, you need 3 pole mounts for 12 modules. Check the Unirac part list (.pdf) page for more details. It comes with module bolt sets, you won't need any hardware.
Comments
You can use Unirac U-LA: https://www.greentechrenewables.com/u-la-flat-roof-ground-mount
Basically, you will need schedule 40 pipes, cross pipes (for each pipe), rail mounting brackets (2x # of rails), sliders (one for each pipe), front and rear end caps (for each pipe).
I recommend you to use Quick U-LA estimation tool>
In addition to that, you may consider using SolarMount low profile tilt leg.
https://www.greentechrenewables.com/solarmount-tilt-leg
In this case, you have to consider the attachment to the ground.
You may also consider Unirac Pole Mount, using a shorter pipe.
I believe part number 500342 would suffice for 4 x Evergreens. So, you need 3 pole mounts for 12 modules. Check the Unirac part list (.pdf) page for more details. It comes with module bolt sets, you won't need any hardware.